Your shopping cart is empty!
The Hublot Oceanographic 4000 Replica Watches is made of titanium, with luminescent indexes in Cheval Blanc Randheli yellow, the Oceanographic 4000 withstands the pressure exerted at the extreme depth of 4,000 m. It has taken 18 months of research, development and testing to present the Hublot Oceanographic 4000 Replica Watches.
Starting with its seal, tested by Hublot Replica Watches in a Roxer tank, submerged and pressurised to the equivalent of 5,000 metres. To ensure the watertightness of the watch and to resist this extreme pressure, the synthetic sapphire crystal is 6.5 thick. This is thicker than normal, but is reasonable for this level of resistance. The case back is screw-down, a sine qua non for reaching such depths. It is made of grade 2 titanium, an extremely strong stainless material.
As its case is made of titanium, the Hublot Oceanographic 4000 Replica Watches is still light on the wrist - although its diameter of 48 mm and its volume are substantial. From the brightness standpoint, the time and elapsed time measured by the flange must be legible from a distance of 25 cm in the dark. To meet this requirement, the dial, the flange and the hands of the Oceanographic 4000 have been optimised to have a larger surface area treated with SuperLuminova™, a luminescent material emitting a yellow colour.
Finally, it has a helium valve, a feature essential to any diving watch capable of descending to great depths. An essential feature when the watch is used in diving chambers, the helium valve allows gases that have infiltrated the watch during the descent to safely escape during the ascent. The valve fitted to the Hublot Oceanographic 4000 Replica Watches is made of stainless steel, positioned at 10 o'clock, visible from the left-hand side lug.